Instant Pot Ultra Info

Ultra001

Steam Release Button:

-The Steam Release Button is UP in the SEALED position
-The Steam Release Button is DOWN in the VENTING position.

UltraSteamRelease1

-The steam release button will automatically set to the Sealed (up) position when you put the lid on.
If for some reason it’s in the Venting (down) position gently turn it until it releases & the button pops up. It’s really more of a “flick” than a turn. Don’t force it or it could break off!

-For a controlled pressure release, (where you release the steam in bursts so liquid doesn’t spew), just press the button part way down, release, press again. Once you know it won’t spew you can do a Quick Release.

-For a Quick Release press the steam release button all the way down until it clicks. This will lock the botton in the venting postion so that you don’t have to physically hold it down the whole time.

Screen Captures of pgs 11 & 12 of the updated online manual:
(click images to see larger images)

UpdatedPage11

Updated Pg12


Float Valve:

When the float valve is in the Down position it’s flush with the lid.
When it’s in the Up position it pops up out of the hole & sits above the lid.

UltraFVpositions


Settings/Using the Knob:

The knob turns & pushes in.

When you first plug in the IP one of the functions will be flashing.
(If your pot has been sitting awhile & your display has gone blank just push the knob in to get started)
Turn the knob to cycle through the different functions until the one you want flashes, then press the knob in to select that function.

The Display will show you the adjustments you can make for that function and a box will be flashing around one of the adjustment options.
Press the knob in to select it, turn the dial to desired setting, then push the knob in to lock in the setting.

Turn the knob to move to the next setting & repeat the above steps for the other settings.

Press the Start button to start the Instant Pot.


Programs & Times:

Time Format: 00:00
The number before the colon is hours;
the number after the colon is minutes.

Custom Temperature Settings:
The temp can’t be adjusted on pressure functions,
only on the non-pressure settings (except Steam & Sterilize)

Functions on Left Side of Display, from Top to Bottom:
(*Note: The times and temps below are what show on my Ultra’s
display when I select them.)

Pressure Cook: Same as “Manual” on the other models.
Time Range: 00:00-6:00 hours
Pressure: High/Low

Soup/Broth:
Time Range: 00:00-6:00 hrs
Pressure: High/Low

Meat/Stew:
Time Range: 00:00-4:00 hrs
Pressure: High/Low

Bean/Chili:
Time Range: 00:00-4:00 hours
Pressure: High/Low

Steam:
Time Range:00:00-4:00
Pressure: High/Low/No Pressure
(No Custom Temps for “No Pressure” setting)

Slow Cook:
Time Range: 00:30-20:00 hours
Pressure: No Pressure
Temperature: Low (185 F)/Med (194 F)/High (208 F)/Custom (104-208 F)
(Page 8 of the manual is incorrect. The minimum time is 0:30 NOT 2:00)

Saute:
Time Range: 00:01-00.30
Pressure: No Pressure
Low (185 F)/Med (194 F)/High (208 F)/Custom (104-338 F)
(Pg 9 of the Manual is incorrect. It doesn’t say that Saute has a custom temp setting but it does)
*NOTE: The temp range for Saute on the Ultra is lower than the temp range on the Duo.
The Duo has a range of 275-410 F;
The Ultra has a range of 104-338 F.
The Duo specs for comparison can be found here:
http://instantpot.com/benefits/specifications-and-manuals/instant-pot-ip-duo-series-specifications/

Warm:
Time Range: 00:10-99:50 hours
Pressure: No Pressure
Low (185 F)/Med (194 F)/High (208 F)/Custom (104-194 F)

Functions on Right Side of Display, from Top to Bottom:

Rice:
Time Range: Automatic (not adjustable)
Pressure: High/Low
(the cook time is set automatically based on the contents, and is for white rice only)

Porridge:
Time Range: 00:00-4:00
Pressure : High/Low

Multigrain:
Time Range: 00:00-4:00
Pressure : High/Low
*There’s a 45 minute pre-soak built into the multi-grain function.
This is for any cook time you set, and there is no way to disable it.
The pre-soak is necessary to soften the hard grains before cooking.
Otherwise they won’t cook properly and could clog the anti-block
shield and float valve causing problems with the Instant Pot.

Cake:
Time Range: 00:00-4:00 hours
Pressure : High/Low
(Pg 9 of the Manual is incorrect-Cake does NOT have a No Pressure option)

Egg:
Time Range: 00:00-0:30 minutes
Pressure : High/Low

Sterilize:
Time Range: 00:00-4:00 hours
Pressure: Low/High/No Pressure
Temperature: Low (230 F)/High (239 F)/No Pressure (181.4 F)
No Custom Temps for “No Pressure” setting.
If you want to customize the temp use “Ultra” instead.
(Temp info isn’t in the manual. I wrote to Instant Pot to get it.)

Yogurt:
Time Range: 00:30-99:30 hours
Pressure: No Pressure
Temperature: Low (91 F)/Med (107 F)/High (181 F)/Custom (104-176 F)

Ultra: This function is the most customizable.
Time Range (with Pressure): 00:00-06:00 Hours
Time Range (No Pressure): 00:01-99:30 hours
Pressure: High/Low/No Pressure
Temperature: Low (131 F)/ Med (197 F)/ High (208 F)/ Custom (104-208 F)
(Page 8 of the manual is incorrect-The max time is 99:30, not 99:50)


Keep Warm:

The maximum time in Keep Warm is 24 hours.
After 24 hours the cooker will automatically turn OFF.
The Keep Warm ON/OFF function can be used at any time during the cooking process.


Delay:

The Delay function allows you to delay the start of cooking.
The default time for Delay is 6 hours, but it can be adjusted
to any time between 00:10 (10 mins) and 24:00 (24 hrs).
You can delay the cook start for all the cooking functions
except for Yogurt and Saute.


Restoring Factory Defaults:

To return to the factory default setting for a specific cooking program, rotate to a specific cooking program, press the central dial to enter the program setting mode, then press and hold the Cancel key until the cooker beeps.

For a full reset of all cooking programs to return the cooker to the factory default settings, removing all customizations, return the cooker to standby mode by pressing ‘Cancel’, then Press and hold the Cancel key until the cooker beeps.


To adjust the ‘Altitude’ follow these steps:

-Return the cooker to the ‘Standby’ mode by pressing ‘Cancel’;
-Press and hold the central dial until the cooker beeps and enters into the system-level settings change;
-Rotate the dial to ‘Alt’ and press to select and rotate to the desired altitude units in feet or meters;
-When the altitude unit is selected, press the central dial to enter ‘Altitude’ adjustment mode, rotate the central dial to make the adjustments; Once the adjustments are made, press the ‘Start’ key to save the system-level settings changes and exit.

The Altitude must only be set once for all programs.  Once the altitude is adjusted, it will apply to all programs.


Using the Ultra to Sous Vide:

Settings to Sous Vide:
Use the Ultra setting.
Temp: Custom/ Select a temp between 104-208 F.
Pressure: None
Set your cook time.
Press Start.

*Ultra has a temperature accuracy of +/- 5°F or 4°C.

With sous vide cooking you put your food in a vacuum sealed bag & cook
it by submerging it in temperature controlled water. This requires a much
longer cook time than pressure cooking. It’s a “low & slow” method.
This method is especially good for meats that you don’t want to over cook.
After cooking meat you can do a quick sear on it in a really hot pan.

You can put your food into either a vacuum sealed bag or a ziplock bag & use *water displacement to get most of the air out.

To do this you put your food in a ziplock bag but don’t seal it all the way. Then you put the bag into water (but don’t let water into the bag) to force the air out. Get as much air out of the bag as possible & then seal it up.

*Water displacement is also called  The Archimedes Principal. This page has directions & photos to explain how it’s done:
http://blog.sousvidesupreme.com/2011/06/sealing-liquids-archimedes-principle/#sthash.eiaYjJar.lTTaMrvu.dpbs

There are many online sites where you can find the temp & cook times for sous vide foods.
“Serious Eats” is my favorite:
http://www.seriouseats.com/2016/01/first-thing-to-cook-with-sous-vide-immersion-circulator-essential-recipes.html


Links to More Info on the Ultra:

Video: How To Use The Instant Pot Ultra 10-in-1 by Ground Leaf
https://www.facebook.com/instantpot/videos/1387059471341439/

Video: Non-Pressure Cooking Features of the Ultra by Ground Leaf:
https://www.facebook.com/instantpot/videos/1392581507455902/

Ultra Beginner’s Manual/Quick Start Guide by Paint the Kitchen Red:
https://www.paintthekitchenred.com/instant-pot-ultra-beginners-quick-start-manual/

Printable Chart for the Ultra Settings by Jim Atwood:
https://drive.google.com/file/d/0B7Hvk7cvHf3kN1VKUWE3d0lCZVU/view

Venting & Sealing for the IP Ultra by Jen Neefer:
http://dumpsterfirecookingschool.com/2017/05/07/ip-ultra-venting-sealing/

Ultra Manual (Updated & Compressed for Faster Loading):
https://drive.google.com/file/d/0B7Hvk7cvHf3kTkU3Sk9Jem5Bc2M/view

Ultra FAQs:
http://instantpot.com/faq/faqs-ultra-10-in-1-multi-use-programmable-pressure-cooker-6-quart/

Ultra Product Info:
http://instantpot.com/wp-content/uploads/2012/02/Instant-Pot-Ultra-Product-IntroductionV21.pdf

Ultra Review by Pressure Cooking Today:
http://www.pressurecookingtoday.com/instant-pot-ultra-60-review-giveaway/

Ultra Preview by Hip Pressure Cooking:
https://www.hippressurecooking.com/preview-instant-pot-ultra-multi-cooker/

Ultra Review (w/Sous Vide Test) by Pressure Cook Recipes:
https://www.pressurecookrecipes.com/instant-pot-ultra-review/

Video: The Duo vs The Ultra by Jeffrey Eisner
https://www.youtube.com/watch?v=ULJl8HT-IE4&t=135s

Video: Setting the Ultra for Sous Vide by Michael R. Hicks
https://www.facebook.com/groups/InstantPotCommunity/permalink/1519694488124534/

Ultra Listing at Sur La Table:
https://www.surlatable.com/product/PRO-3436474/Instant+Pot+Ultra

Ultra Listing at Kohl’s
https://www.kohls.com/product/prd-3012816/instant-pot-ultra-10-in-1-6-qt-programmable-pressure-cooker.jsp

Ultra Listing on Amazon:
https://www.amazon.com/Instant-Ultra-Electric-Pressure-Cooker/dp/B06Y1MP2PY/

Instant Pot Model Comparison from Hip Pressure Cooking
https://www.hippressurecooking.com/which-instant-pot-model-is-right-for-you/

Click Image to PIN IT:

UltraPin




Advertisements

2 thoughts on “Instant Pot Ultra Info

  1. I recently got an Ultra, my first IP, I’ve made yogurt several times in it but it seems to me that the yogurt setting is backwards, when you first select it, it defaults to what seems to me to be the incubation setting, so I change all the settings so I can boil the milk, once that is finished and I am ready to incubate, the settings now default to the boil setting since it remembers the last setting, so now I go to change it again, really what I do is press and hold cancel, in essence I am doing a reset. That does not seem very efficient to me so I don’t know if I am doing it wrong and there is actually a way around it. Do you have any insight on this?

    Like

    1. Malu ~ I haven’t made yogurt in my Ultra yet so I don’t have any first hand insight or tricks into it.
      I don’t think you’re doing anything wrong though because I’ve run into the “last used” memory issue when
      putting in my settings for other functions, and like you, I just reset it back to factory defaults.
      I wish there was an option to turn off the memory function but as far as I know there isn’t.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s